- slicer settings
Bambu Lab layer height: limits, presets and first layer for every printer
Bambu Lab printers take layers of 20% to 70% of the nozzle: 0.08 to 0.28 mm on a 0.4 mm nozzle, with a 0.20 mm first layer. Limits and presets per printer.
- slicer settings
- calibration
Creality layer height: Ender 3, K1 and K2 limits, presets and first layer
Creality Print sets 0.20 mm layers and a 0.20 mm first layer on every Ender-3, K1 and K2 with a 0.4 mm nozzle; its profiles allow 0.08 mm up to 0.20 to 0.36 mm.
- slicer settings
- print time
- dimensional accuracy
Does layer height affect quality? What thinner layers change, and what they cost
Yes: thinner layers shrink the steps on curves and slopes, but 0.08 mm took 2.18 times as long as 0.20 mm in Bambu Lab's test. Filament use barely changes.
- slicer settings
- flow rate
First layer line width: 0.5 mm on a 0.4 mm nozzle, and why it is wider
Print the first layer about 125% of the nozzle wide: 0.5 mm on a 0.4 mm nozzle in Bambu Studio and Prusa profiles. The wider line grips the bed better.
- slicer settings
- multi color
HueForge layer height: 0.08 mm layers on a 0.16 mm first layer
HueForge's default layer height is 0.08 mm, printed on a 0.16 mm first layer at 100% infill. Match both in your slicer or every color swap shifts.
- slicer settings
- calibration
- stepper motor
Jerk vs acceleration on a 3D printer, and junction deviation explained
Acceleration (mm/s²) is how fast speed changes; jerk (mm/s) is the speed change allowed instantly at a corner. Junction deviation = 0.4 × jerk² ÷ acceleration.
- slicer settings
- print time
Layer height for a 0.2 mm nozzle: 0.04 to 0.16 mm, 0.10 mm first layer
Use 0.04 to 0.16 mm layers with a 0.2 mm nozzle (0.14 mm max on Bambu Lab). Start at 0.10 mm with a 0.10 mm first layer and 0.22 mm lines.
- slicer settings
- calibration
Layer height for a 0.4 mm nozzle: 0.08 to 0.32 mm, 0.20 mm first layer
A 0.4 mm nozzle prints 0.08 to 0.32 mm layers, 0.20 mm by default and for the first layer. Bambu Lab caps it at 0.28 mm; slicers refuse over 0.40 mm.
- slicer settings
- flow rate
Layer height for a 0.6 mm nozzle: 0.12 to 0.48 mm, 0.30 mm first layer
Use 0.12 to 0.48 mm layers with a 0.6 mm nozzle (0.42 mm max on Bambu Lab), 0.30 mm to start, and a 0.30 mm first layer, no more than 0.39 mm.
- slicer settings
- flow rate
Layer height for a 0.8 mm nozzle: 0.16 to 0.64 mm, 0.40 mm first layer
Use 0.16 to 0.64 mm layers on a 0.8 mm nozzle, at most 0.56 mm on Bambu Lab. Start at 0.40 mm, with a 0.40 mm first layer and 0.82 to 0.9 mm lines.
- slicer settings
- flow rate
Layer height for PLA, PETG, ABS and TPU, and the first layer for each
PLA prints at 0.20 mm on a 0.4 mm nozzle, with a 0.20 mm first layer. PETG, ABS, ASA and TPU use the same heights; each filament caps the speed.
- slicer settings
"Layer height exceeds the limit in printer settings": what it means and the fix
Bambu Studio and OrcaSlicer warn when layer height passes the printer's Max limit, 0.28 mm on a Bambu 0.4 mm nozzle. Slicing stops only above the nozzle size.
- slicer settings
Line width by feature: outer wall, inner wall, top surface, infill and support
Outer wall line width on a 0.4 mm nozzle: 0.42 mm in Bambu Studio, 0.45 mm in PrusaSlicer, 0.40 mm in Cura. Inner wall, top, infill and support too.
- slicer settings
- print time
Lithophane layer height: what to use and why thin layers matter
Print an FDM lithophane at 0.10 to 0.12 mm layers; about 0.2 mm is the coarsest that still looks right. Plus infill, walls, thickness and speed.
- slicer settings
- calibration
Prusa layer height: PrusaSlicer presets and first layer for MK4S, CORE One, MK3S and XL
Prusa printers default to 0.20 mm layers on a 0.4 mm nozzle (0.15 mm on the MK3S) and a 0.20 mm first layer. PrusaSlicer presets for every printer and nozzle.
- slicer settings
- print time
Resin printer layer height: 0.05 mm default, and how exposure time changes
Use 0.05 mm layers on a resin printer. The Elegoo Saturn 4 Ultra and Mars 5 Ultra accept 0.01 to 0.2 mm, and thicker layers need longer exposure.
- slicer settings
Which layer height is strongest? What the tensile tests show
On a 0.4 mm nozzle, 0.15 to 0.20 mm layers test strongest. Thinner layers don't bond better, and 0.30 mm hooks held half the load in CNC Kitchen's test.
- slicer settings
- tolerances
Wall thickness for 3D printing: 0.8 mm minimum, 1.5 mm recommended
Make FDM walls at least 0.8 mm thick and 1.5 mm where you can: 2 and 4 walls on a 0.4 mm nozzle. Wall counts per slicer, resin minimums and walls vs infill.
- slicer settings
- print time
What is layer height in 3D printing? Meaning, resolution and common values
Layer height is the thickness of each printed layer, set in the slicer. 0.20 mm is standard on a 0.4 mm nozzle, with presets from 0.08 to 0.28 mm.
- scale
- slicer settings
How to scale a 3D print in Bambu Studio (and Bambu Handy)
Select the model, press S and type a percentage in the Scale row with uniform scale ticked, or type a size in mm. Bambu Handy has no scale option.